Wooden doors are a popular type that are more durable and aesthetically pleasing. However, over time, wooden doors may experience paint peeling or aging. If wooden doors are replaced directly, it will be wasteful and costly. Many people choose to renovate wooden doors. Can wood grain paper be applied to wooden door renovation? How can we stick wood grain paper if possible? Follow the editor to learn about the specific steps for renovating wooden doors and pasting wood grain paper!

　　Can wooden doors be renovated with wood grain paper

　　Wood grain paper, also known as polystyrene paper, is a type of specialty paper. Generally, the original wood pulp kraft paper is used as the base paper, and then the surface is treated with embossing, dyeing and other processes before producing wood grain paper with colorful and diverse patterns.

　　Wood grain paper patterns are printed imitating tree patterns, with a thickness generally ranging from 0.5-1.0mm and a smooth and glossy surface. Wood grain paper belongs to the category of Baoli paper in decorative paper, and is the weakest type of decorative paper in terms of wear resistance. Mainly used for exterior decoration or trimming of furniture, speakers, and other home and office supplies, wooden door renovation can be done with wood grain paper.

　　The specific steps for renovating wooden doors and applying wood grain paper are as follows:

　　1. We need to tear off the old wood grain paper. After tearing off the old wood grain paper, wash away the stains from the old wooden furniture, dry it, and use it.

　　Attention: Use sandpaper No. 0 to polish, apply putty on uneven areas, and polish again.

　　2. Use a 20 inch oil brush to apply banana white primer, and brush 1-2 coats on the surface of the furniture to make the wooden surface completely white. After 8-10 hours, dry thoroughly, use No. 0 sandpaper to polish, remove small particles and unevenness, and brush again.

　　3. Mix the above materials with 50% thick white paint, 35% gasoline or pine perfume, 10% fat gum varnish or cooked tung oil, and 5% drying penalty. Filter them with 180 mesh sieve for standby. Brush the original white paint mixture for the second time, dry it, and then you can apply the sticker.

　　4. Cut the wood grain paper into many pieces according to the size requirements of the wood, use a 2-inch oil brush and banana white latex solution (diluted 1:1 with original glue and water), brush it on the painted wood surface, then stick the wood grain paper on top and wipe it with a towel to make it tightly adhere to the wood surface.

　　Attention: Do not allow wrinkles or bubbles to appear. When connecting each piece of wood grain paper, the wood grain should also be consistent, and there should be no gaps at the interface. When applying glue, apply one patch after another to prevent the glue from drying out.

　　5. After all the wood grain paper is pasted on the bottom, air dry it, wipe it once with a fine cloth, and then brush it with phenolic varnish by swimming. Request to brush three times, using the same painting method as previously mentioned.