1、 Wet stickers

　　1. Measure the size of the object being pasted;

　　2. Cutting stickers;

　　3. Pre pasting, testing whether the size of the cut stickers is appropriate, and trimming;

　　4. Spray liquid onto the object with a handheld sprayer;

　　5. Remove the protective layer of the sticker completely, cover the sticker on the object to be pasted and flatten it (quickly);

　　6. Scrape off excess liquid and gas with a scraper;

　　7. Wait, it will take about a day to work.

　　2、 Dry paste

　　1. The size of the sticker has been predetermined;

　　2. Select two points on the sticker, where the two points represent the longest distance of the sticker;

　　3. Peel off one protective layer from each point, approximately 1cm to 2cm;

　　4. Fold the protective layer towards the edge of the sticker. 'External' is very important;

　　5. When applying stickers to the object being pasted, only those two points are actually pasted:

　　6. Pull out the protective layer on the "outside" in the direction of the sticker and press it while pulling;

　　7. Finally, puncture and press to remove the bubbles. Completed.